hitls_type.h 文件参考

hitls_type.h 的引用(Include)关系图:

此图展示该文件直接或间接的被哪些文件引用了:

浏览源代码.

宏定义
#define	DTLS_SCTP_SHARED_AUTHKEY_LEN   64
	DTLS SCTP authkey length, which is specified in the protocol and can be used to determine the length when the auth key is set.
#define	TLS13_KE_MODE_PSK_ONLY   1u
	TLS1.3 key exchange mode: Only PSKs are used for key negotiation.
#define	TLS13_KE_MODE_PSK_WITH_DHE   2u
	TLS1.3 key exchange mode: Both PSK and (EC)DHE are used for key negotiation.
#define	TLS13_CERT_AUTH_WITH_DHE   4u
	TLS1.3 certificate authentication: The certificate authentication is used and the (EC)DHE negotiation key is required.
#define	SSLV2_VERSION_BIT   0x00000001U
#define	SSLV3_VERSION_BIT   0x00000002U
#define	TLS10_VERSION_BIT   0x00000004U
#define	TLS11_VERSION_BIT   0x00000008U
#define	TLS12_VERSION_BIT   0x00000010U
#define	TLS13_VERSION_BIT   0x00000020U
#define	DTLS10_VERSION_BIT   0x80000000U
#define	DTLS12_VERSION_BIT   0x40000000U
#define	TLS_VERSION_MASK   (TLS12_VERSION_BIT | TLS13_VERSION_BIT)
#define	DTLS_VERSION_MASK   DTLS12_VERSION_BIT
#define	HITLS_MODE_ENABLE_PARTIAL_WRITE   0x00000001U
#define	HITLS_MODE_ACCEPT_MOVING_WRITE_BUFFER   0x00000002U
#define	HITLS_MODE_AUTO_RETRY   0x00000004U
#define	HITLS_MODE_NO_AUTO_CHAIN   0x00000008U
#define	HITLS_MODE_RELEASE_BUFFERS   0x00000010U
#define	HITLS_MODE_SEND_CLIENTHELLO_TIME   0x00000020U
#define	HITLS_MODE_SEND_SERVERHELLO_TIME   0x00000040U
#define	HITLS_MODE_SEND_FALLBACK_SCSV   0x00000080U
#define	HITLS_MODE_ASYNC   0x00000100U
#define	HITLS_MODE_DTLS_SCTP_LABEL_LENGTH_BUG   0x00000400U
#define	HITLS_SENT_SHUTDOWN   1u
#define	HITLS_RECEIVED_SHUTDOWN   2u /* Received peer shutdown alert, normal close_notify or fatal error */
#define	HITLS_NOTHING   1u
#define	HITLS_WRITING   2u
#define	HITLS_READING   3u
#define	HITLS_ASYNC_PAUSED   4u
#define	HITLS_ASYNC_NO_JOBS   5u
#define	HITLS_CC_READ   0x001u /* Read state */
#define	HITLS_CC_WRITE   0x002u /* Write status */

类型定义
typedef struct TlsCtx	HITLS_Ctx
	HITLS context
typedef struct TlsConfig	HITLS_Config
	config context
typedef struct TlsCipherSuiteInfo	HITLS_Cipher
	cipherSuite information
typedef struct TlsSessCtx	HITLS_Session

枚举
enum	HITLS_SESS_CACHE_MODE { HITLS_SESS_CACHE_NO , HITLS_SESS_CACHE_CLIENT , HITLS_SESS_CACHE_SERVER , HITLS_SESS_CACHE_BOTH }
	HITLS_SESS_CACHE_MODE: mode for storing hitls sessions. 更多...
enum	HITLS_KeyUpdateRequest { HITLS_UPDATE_NOT_REQUESTED = 0 , HITLS_UPDATE_REQUESTED = 1 , HITLS_KEY_UPDATE_REQ_END = 255 }
	key update message type 更多...
enum	HITLS_HandshakeState {   TLS_IDLE , TLS_CONNECTED , TRY_SEND_HELLO_REQUEST , TRY_SEND_CLIENT_HELLO ,   TRY_SEND_HELLO_VERIFY_REQUEST , TRY_SEND_HELLO_RETRY_REQUEST , TRY_SEND_SERVER_HELLO , TRY_SEND_ENCRYPTED_EXTENSIONS ,   TRY_SEND_CERTIFICATE , TRY_SEND_SERVER_KEY_EXCHANGE , TRY_SEND_CERTIFICATE_REQUEST , TRY_SEND_SERVER_HELLO_DONE ,   TRY_SEND_CLIENT_KEY_EXCHANGE , TRY_SEND_CERTIFICATE_VERIFY , TRY_SEND_NEW_SESSION_TICKET , TRY_SEND_CHANGE_CIPHER_SPEC ,   TRY_SEND_END_OF_EARLY_DATA , TRY_SEND_FINISH , TRY_RECV_CLIENT_HELLO , TRY_RECV_HELLO_VERIFY_REQUEST ,   TRY_RECV_SERVER_HELLO , TRY_RECV_ENCRYPTED_EXTENSIONS , TRY_RECV_CERTIFICATE , TRY_RECV_SERVER_KEY_EXCHANGE ,   TRY_RECV_CERTIFICATE_REQUEST , TRY_RECV_SERVER_HELLO_DONE , TRY_RECV_CLIENT_KEY_EXCHANGE , TRY_RECV_CERTIFICATE_VERIFY ,   TRY_RECV_NEW_SESSION_TICKET , TRY_RECV_END_OF_EARLY_DATA , TRY_RECV_FINISH , HS_STATE_BUTT = 255 }